Determine TV’s signal source
For traditional RF Cable Signal over Coax, or a distributed/modulated club setup over Coax, connect
the coax at the base of the unit. Skip to E3 View Monitor Setup.
For installations using a Set Top Box (Cable Box, Satellite Box or IPTV Box) for each unit, determine
the output from the Set Top Box. Follow Set Top Box Setup procedure.
• Coax - Connect the included coax jumper at the base of the unit. Set the Device Installed to
STB+Tuner.
• HDMI - The facility needs to supply the connection cable between the Set Top Box and the HDMI
coupler at the base of the unit. Set the Device Installed to STB+HDMI.
STB (Set Top Box) Setup
Set Top Box Variables
Determine which configuration you have.
Ethernet, HDMI, or CoaxConnection options
MYE CableSAT, or Broadcast Vision EntertainmentTransmitter type
Near or FarSet Top Box location
Connection options
CoaxHDMIEthernet
Page 43 of 261
Cybex 770T/790T Treadmill Part Number
To Next Page
Loading...
