CYBEX 770T Service Manual

Test network
1. Tap TEST NETWORK.
Description
TEST NETWORK1
INSTALL2
NEXT3
2. When network test passes, tap INSTALL.
If network test fails, check the network connections and retry.
3. Tap NEXT.
TV configuration
The TV configuration only needs to be performed on the first unit installed. Configure the first unit
completely, save the configuration, then assemble and configure all other units.
1. Select Analog/Digital Cable and tap NEXT.
This will scan for all available channels. The scan can take 20 minutes to complete.
If scan was previously configured and stored, choose Download Configuration and tap NEXT to
configure other units. Go to Test Cybex GO Monitor.
Description
Analog/Digital Cable1
Download Configuration2
NEXT3
Page 62 of 261
Cybex 770T/790T Treadmill Part Number

CYBEX 770T Specifications

General

Weight Capacity	400 lbs
Speed Range	0.5 - 12.4 mph
Incline Range	0 - 15%
Running Surface	22" x 60"
Heart Rate Monitoring	Yes
Display	15" Touch Screen