CYBEX 770T Service Manual

DescriptionError Code
Drive Enable Line is open
Error 19
Over Current (Output)
Error 92
Over Voltage (DC Link)
Error 93
Over Heat (Heatsink)
Error 94
Low Voltage (DC Link)
Error 95
Thermal Integrator of output current
Error 96
Display Communication Lost – Belt speed zero
Error 98
Display Communication Lost – Belt moving
Error 99
Input Current OC trip (Drives with PFC only)
Error 103
Thermal Integrator of Input Current (Drives with PFC only)
Error 105
Cannot find home position on power-up
Error 140
Cannot find home position during use
Error 141
Out of incline range (over 15% or lower than -3%)
Error 142
Out of Speed Range (over 150 Hz)
Error 150
Page 76 of 261
Cybex 770T/790T Treadmill Part Number

CYBEX 770T Specifications

General

Weight Capacity	400 lbs
Speed Range	0.5 - 12.4 mph
Incline Range	0 - 15%
Running Surface	22" x 60"
Heart Rate Monitoring	Yes
Display	15" Touch Screen