Cybex 750A/750AT Arc Trainer Owner’s Manual
Safety
Page 1-4
Unit with A/V Options
Devices connected to Cybex equipment must comply with appropriate safety standards. This includes
but not limited to: UL 1647 and EN 60335-1.
There must be adequate mechanical mounting of the device in all combinations (confi gurations).
Device must be stable on the unit in all confi gurations.
Warning and Caution Decals
NOTE: To replace any worn or damaged labels, see Chapter 5 – Customer Service for contact information.
Warning decals indicate a potentially hazardous situation which, if not avoided, could result in death
or serious injury.
Carefully read and understand the following caution and warning labels before using the unit.
Warning decal part number
750A-372-4 (if applicable)
750A-372-4 A
WARNING
DISCONNECT POWER
BEFORE SERVICING.
Voltage: 100-240 VAC~
50/60Hz 1.8 Amps 1-Phase
To Next Page
Loading...
Need help?
General
