Operation
Page 3–2
Cybex 750A/750AT Arc Trainer Owner’s Manual
Read and understand all warnings and cautions in Chapter 1 – Safety and all operation instructions in
this chapter before operating unit.
Mount and Dismount
WARNING: Wait until all moving parts come to a complete stop and foot plates are in lowest
position before mounting or dismounting.
To mount unit safely:
1. Verify unit is in Dormant Mode and foot plates are completely stopped.
2. Grasp handrail and step carefully onto foot plates.
To dismount unit safely:
1. Wait until foot plates come to a complete stop.
2. Grasp handrails for support and carefully step off back of unit.
Emergency Dismount
If an emergency stop and dismount is required:
1. Grasp handrails for support.
2. Stop striding.
3. Wait until foot plates come to a complete stop.
4. Continue to hold handrails while carefully stepping off unit.
To Next Page
Loading...
