EasyManuals Logo

CYBEX Pro+ Service Manual

CYBEX Pro+
70 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #9 background imageLoading...
Page #9 background image
Safety
Page 1-1
Cybex Pro+ Treadmill Service Manual
1- Safety
IMPORTANT: Read all instructions and warnings before using the treadmill.
Important Voltage Information
Before plugging the power cord into an electrical outlet, verify that the voltage requirements for your area
match the voltage of the treadmill that you have received. The power requirements for the Cybex Pro+
treadmill include a grounded, dedicated circuit, rated for one of the following: 115 VAC ±5%, 60 Hz and
20 amps; 208/220 VAC, 60 Hz, 15 amps or 230 VAC ±5%, 50 Hz and 15 amps. See the serial number
decal for the exact voltage requirements of your treadmill.
! WARNING: Do not attempt to use this unit with a voltage adapter.
Do not attempt to use this unit with an extension cord.
Grounding Instructions
This treadmill must be grounded. If it should malfunction or break down, grounding provides a path of
least resistance for electric current to reduce the risk of electric shock. This product is equipped with a
cord having an equipment-grounding conductor and a grounding plug. The plug must be plugged into
an appropriate outlet that is properly installed and grounded in accordance with all local codes and
ordinances.
! DANGER: Improper connection of the
equipment-grounding conductor can
result in a risk of electric shock. Check
with a quali ed electrician or service
provider if you are in doubt as to whether
the treadmill is properly grounded. Seek
a quali ed electrician to perform any
modi cations to the cord or plug. Cybex
is not responsible for injuries or damages
as a result of cord or plug modi cation.
This treadmill is for use on a nominal
115 VAC ±5%, 60 Hz and 20 amps, 208/
220 VAC, 60 Hz, 15 amps or 230 VAC
±5%, 50 Hz and 15 amps and a grounded,
dedicated circuit. Make sure that the
treadmill is connected to an outlet having
the same con guration as the plug. Do not
use a ground plug adapter to adapt the
power cord to a non-grounded outlet.
115V Euro Plug 208/220V
NEMA 5-20 CEE 7/7 NEMA 6-15

Other manuals for CYBEX Pro+

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the CYBEX Pro+ and is the answer not in the manual?

CYBEX Pro+ Specifications

General IconGeneral
BrandCYBEX
ModelPro+
CategoryTreadmill
LanguageEnglish

Related product manuals