CYBEX VR2 - Page 11

Cybex VR2 Owner’s Manual
Hip Adduction - Product No. 4640
Machine Weight Weight Stack Size
420 lbs. 205 lbs. inches = 28 W x 53 L x 55 H
191 kg 93 kg cm = 71 W x 135 L x 140 H
• Leg support accomplished with kneepads and dual footrests to eliminate
unwanted torque around the knee.
• Weight stack positioned in front of user to act as a privacy shield.
• Sliding 5-LB increment weights allow the user to fine-tune resistance levels.
Hip Abduction - Product No. 4645
Machine Weight Weight Stack Size
420 lbs. 205 lbs. inches = 28 W x 53 L x 55 H
191 kg 93 kg cm = 71 W x 135 L x 140 H
• Leg support accomplished with kneepads and dual footrests to eliminate
unwanted torque around the knee.
• Weight stack positioned in front of user to act as a privacy shield.
• Sliding 5-LB increment weights allow the user to fine-tune resistance levels.
Rotary Calf - Product No. 4620
Machine Weight Weight Stack Size
683 lbs. 405 lbs. inches = 43 W x 59 L x 61 H
310 kg 184 kg cm = 110 W x 150 L x 155 H
• Footplate rotates through a natural arc keeping the foot in contact with the
plate eliminating need to roll the foot over the edge of the plate.
• A seated variable resistance exercise that eliminates the spinal compression
found in the traditional standing units.
• Sliding 5-LB increment weights allow the user to fine-tune resistance levels.
Dual-Axis Chest Press - Product No. 4507
Machine Weight Weight Stack Size
611 lbs. 305 lbs. inches = 56 W x 46 L x 76 H
278 kg 139 kg cm = 143 W x 117 L x 193 H
• Overhead pivot provides a more natural pattern when compared to lower
pivoting units.
• Adjustable starting position allows appropriate range and improves safety.
• Dual Axis Technology
®
provides an innovative “user-defined” motion that
allows each user to determine their optimal path, also boosting the effective
loading in the muscle.
• Sliding 5-LB increment weights allow the user to fine-tune resistance levels.
Technical
Specifications
Page 1-5