CYBEX VR2 - Page 12

Single-Axis Chest Press - Product No. 4506
Machine Weight Weight Stack Size
559 lbs. 305 lbs. inches = 56 W x 46 L x 76 H
254 kg 139 kg cm = 143 W x 117 L x 193 H
• Overhead pivot provides a more natural pattern when compared to lower
pivoting units.
• Adjustable starting position allows appropriate range and improves safety.
• Sliding 5-LB increment weights allow the user to fine-tune resistance levels.
Dual-Axis Incline Press - Product No. 4512
Machine Weight Weight Stack Size
610 lbs. 305 lbs. inches = 56 W x 51 L x 64 H
277 kg 139 kg cm = 143 W x 130 L x 163 H
• The path of motion is comparable to a 30
o
incline.
• Overhead pivot geometry provides a more natural arc of motion.
• Dual Axis Technology
®
provides an innovative “user defined” motion that
allows each user to determine their optimal path, also boosting the effective
loading in the muscle.
• Sliding 5-LB increment weights allow the user to fine-tune resistance levels.
Single-Axis Incline Press - Product No. 4511
Machine Weight Weight Stack Size
544 lbs. 305 lbs. inches = 56 W x 51 L x 64 H
247 kg 139 kg cm = 143 W x 130 L x 163 H
• The path of motion is comparable to a 30
o
incline.
• Overhead pivot geometry provides a more natural arc of motion.
• Sliding 5-LB increment weights allow the user to fine-tune resistance levels.
Dual-Axis Pulldown - Product No. 4515
Machine Weight Weight Stack Size
630 lbs. 305 lbs. inches = 39 W x 56 L x 76 H
286 kg 139 kg cm = 99 W x 142 L x 193 H
• “Free float” handles encourage a user pull to the center rather than “behind
the neck”.
• Neutral handles allow a single-axis motion in the sagittal plane.
• Dual Axis Technology
®
provides an innovative “user defined” motion that
allows each user to determine their optimal path, also boosting the effective
loading in the muscle.
• Sliding 5-LB increment weights allow the user to fine-tune resistance levels.
Cybex VR2 Owner’s Manual
Technical
Specifications
Page 1-6