DAP-1610 AC1200 Wi-Fi Range Extender
User Manual
Configuring via Web-based Interface
In the General Settings section, the following parameters are available:
Parameter Description
Enable Wireless
To enable Wi-Fi connection, move the switch to the right.
To disable Wi-Fi connection, move the switch to the left.
Country The country you are in. Select a value from the drop-down list.
Wireless mode
Operating mode of the wireless network of the extender. This
parameter defines standards of the devices that will be able to use
your wireless network. Select a value from the drop-down list.
Select channel
automatically
Move the switch to the right to let the extender itself choose the
channel with the least interference.
Enable additional
channels
Available on the 5GHz tab.
If the switch is moved to the left, the device automatically selects
one of available standard channels (below the 100th). To use
additional channels (the 100th and higher), move the switch to the
right.
Channel
The wireless channel number. Left-click to open the window for
selecting a channel (the action is available, when the Select
channel automatically switch is moved to the left).
Enable periodic
scanning
Move the switch to the right to let the extender search for a free
channel in certain periods of time. When the switch is moved to the
right, the Scanning period field is available for editing.
Scanning period
Specify a period of time (in seconds) after which the extender
rescans channels.
When you have configured the parameters, click the APPLY button.
Page 43 of 91
To Next Page
Loading...
