14D-Link DCS-5010L User Manual
Section 2 - Installation
There are three ways to set up your camera:
Zero Conguration Setup: If you have a mydlink-enabled router (D-Link cloud router), this is the easiest way to set up
your camera. Refer to “Zero Conguration Setup” on page 15.
Camera Setup Wizard: If you do not have a mydlink-enabled router, use the Camera Setup Wizard to guide you through
setup and initial conguration of your camera. Refer to “Camera Setup Wizard” on page 19.
Manual Hardware Installation: This section shows you how to manually set up your camera. However, in order to use
the mydlink features of your camera, you will still need to run the Camera Setup Wizard. Refer to “Manual Hardware
Installation” on page 20.
Installation
Note: If you experience issues registering this device with your mydlink account, or If you purchased an open box or resold unit,
perform a hard reset by pressing and holding the reset button on the device for 10 seconds while the device is powered on. If
you are returning the device to the place of purchase, please perform the hard reset procedure to clear the device of
any personal data.
To Next Page
Loading...
