D-Link DCS-5010L - Internet Connection Setup Wizard

28D-Link DCS-5010L User Manual 28
Section 4 - Conguration
Internet Connection Setup Wizard
The Internet Connection Setup Wizard will guide you through a step-by-step process to
congure your new D-Link Camera and connect the camera to the Internet.
Click Next to continue.
Select what kind of Internet connection your camera should use:
DHCP Connection (Default): Leave this option selected if you have a DHCP server
running on your network and would like a dynamic IP address to be assigned to
your camera automatically.
Static IP Address: This will allow you to manually enter your network settings for
the camera. Select this option if your Internet Service Provider (ISP) or network
administrator has provided you with a set of predened IP addresses. If you are
not sure what settings to enter, check with your ISP or network administrator.
PPPoE Connection: If your camera is directly connected to the Internet through
a DSL modem, you may select this option. Enter the User Name and Password
provided to you by your ISP.
Click Next to continue.