D-Link DCS-5010L

33D-Link DCS-5010L User Manual 33
Section 4 - Conguration
Click to enable the DDNS function.
Select your Dynamic DNS Server from the drop-down menu.
Enter the Host Name of the DDNS server.
Enter your User Name or e-mail used to connect to the DDNS server.
Enter your Password used to connect to the DDNS server.
This allows you to specify the periodic update time for the DDNS
address.
Click Save Settings.
Enable:
Server Address:
Host Name:
User Name:
Password:
Timeout:
Dynamic DNS (DDNS)
This section allows you to congure the DDNS (Dynamic Domain Name System) settings for your camera. DDNS will allow users to access your
camera using a domain name instead of an IP address.