40D-Link DCS-5010L User Manual 40
Section 4 - Conguration
FTP
Host Name:
Port:
User Name:
Password:
Path:
Passive Mode:
Enter the IP address of the FTP server that you will be connecting to.
Enter the port number of the FTP server that you will be connecting to.
Enter the User Name for your FTP server account.
Enter the Password for your FTP server account.
Enter the destination path/folder to save les to on the FTP server.
Click Yes to enable passive mode if your camera is behind a router
protected by a rewall.
This section allows you to congure your camera to send snapshots and video clips to an FTP server.
Enable
uploading of
images to an
FTP server:
Image
Frequency:
Base File Name:
Check the box to enable uploading of snapshots to an FTP server.
Images will be uploaded as specied below:
• Click Always to upload snapshots continuously based on the
Image Frequency specied.
• Click Schedule to set a schedule for starting and stopping the
uploading of snapshots.
• Select Motion Detection if you would like the camera to upload
images only when motion is detected.
Set how frequently you want images to be taken and uploaded. You
can specify a number of frames per second, and a number of seconds
per frame.
Enter the desired base le name for your snapshots. Keep in mind
that the base le name will also include the time stamp information.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
