D-Link DCS-5010L

34D-Link DCS-5010L User Manual 34
Section 4 - Conguration
Image Setup
If you notice ickering when you view the video from your camera,
check the box to enable anti icker. Otherwise, you can leave this
feature disabled.
Check the box to ip the image vertically.
Check the box to ip the image horizontally.
Note: If the camera is installed upside down, Flip Image and Mirror should
both be checked.
Allows you to adjust the brightness level. Select a setting between -5
and +5 from the drop-down menu.
Allows you to adjust the contrast level. Select a setting between -5
and +5 from the drop-down menu.
Allows you to adjust the color saturation level. Select a setting between
-5 and +5 from the drop-down menu.
Click Save Settings.
Enable Anti
Flicker:
Flip Image:
Mirror:
Brightness
Control:
Contrast
Control:
Saturation
Control:
This section allows you to congure the image settings for your camera.