42D-Link DCS-5010L User Manual 42
Section 4 - Conguration
Time and Date
Current Time:
Time Zone:
Synchronize
NTP Server:
NTP Server
Used:
Daylight
Daving:
Set the Date
and Time
Manually:
Displays the current date and time.
Select the Time Zone for your region from the drop-down menu.
Enabling this option will allow the camera to update its system clock
automatically from an NTP server.
When Synchronize NTP Server is enabled, you can select the NTP Server
closest to you from the drop-down menu.
Click to enable Daylight Saving Time (DST). If DST is enabled, you can
select an Oset using the drop-down menu, or enter a Start and End
date with the Month, Week, Day of Week, and Time.
When Synchronize NTP Server is disabled, you can set the date and
time of the internal system clock manually. Or you can click Copy
Your Computer’s Time Settings to automatically set the date and
time based on your computer’s settings.
Click Save Settings.
This section allows you to congure the settings of the internal system clocks for your camera.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
