99
How to Start Recording
To start recording with a camera, click the Manual Recording button . An AVI file will appear in your IPView SE folder.
NOTE:
You must stop recording before changing any camera settings.
How to Stop Recording
To stop recording with a camera, click the Manual Recording button again.
Camera Settings
Once you have completed the initial configuration of the DCS-950G using the Web-based interface, you can review or change your configuration using either the
Web-based configuration utility or the Settings in the DCS-950G IPView SE.
Configure Camera from Web
Click the Configure Camera from Web button to start configuring your camera from the web again (see page 24).
To Next Page
Loading...
