To Next Page

To Previous Page

MAINTENANCE

MAINTENANCE > Device Management

To ensure the highest security and prevent unauthorized usage of your IP camera, the Administrator has the exclusive privilege to authorize all users. The

DCS-950G supports multi-level password protection/access that can be restricted by the Administrator for defined users who have a User Name and User

Password.

The Administrator can release a public User Name and Password so that when remote users access the DCS-950G they will be allowed to view the images

transmitted by the DCS-950G.

Note that when the DCS-950G is used for the first time, it is highly recommended that the Administrator set the Admin ID and Admin Password to constrain user

access to the DCS-950G since the Default settings for the Admin ID and Admin Password are both “admin.” The password must be at least 5 characters. Once the

ID and Password are defined, only the Administrator has access to the management of the DCS-950G. This procedure should be done as soon as possible. After

done the configuration, you may click Apply button to save the new settings.