To Next Page

To Previous Page

How to Add a New Camera

To add a new camera, select the Camera button from the IPView SE. Make sure that the green lights are on when clicking the camera button.

Select the camera you would like to connect to and click Add A Camera. If the camera is not listed in this list, click the Input IP Address button. Enter the IP Address

of the camera in the specified field and click Add. If the IP Address is entered incorrectly or if you have a bad network connection, a dialog box will appear to notify

you of the error. To add cameras in IPView SE, check that you have your network configured correctly. To add a remote camera, you need to have Internet access.