90
If you are unsure of the IP Address of the camera, you can click on Search to search for all available cameras that are installed on your local area network.
NOTE:
Only cameras on your local area network can be located using Search in IPView SE. If you want to add a camera via the Internet, you must enter
in a public IP Address. Please note that if your camera is behind a router, you will need to enter your router’s WAN IP followed by a colon, then the
port number that is assigned to your camera. As in example 10.10.10.80:800, where 10.10.10.80 is your router’s WAN IP and :800 is the port that
your camera is using.
To Next Page
Loading...
Need help?
General