58
y Recipient Email Address: The e-mail address of recipients for snapshots or a system log file.
y Port: This is a port number for your SMTP server. The default setting is 25. If you use ports other than 25 you can change it here.
Motion Detection –
y Motion Detection Skip Time: Increasing the time set here will avoid false alarms. This option allows you to set the amount of time between motion detection
events before the next recording will start.
SETUP > Motion Detection
This option allows you to set up Motion Detection on your IP camera. In order to use motion detection you must first check the Enable Motion Detection checkbox. A
maximum of 3 windows can be created each with their own separate Sensitivity and Percentage ranges. After done the configuration, you may click
Save Settings button to save the new settings or Don’t Save Settings button to abandon it.
To Next Page
Loading...
Need help?
General