60
y Percentage: Increasing the time set here will avoid false alarms. This option allows you to set the amount of time between motion detection events before the
next recording will start.
y Sensitivity: Sets the measurable difference between two sequential images that would indicate motion.
y Zone 1-3: Click to open the corresponding motion window. To assign a name to the window, enter the desired name in the entry field next to the zone button.
y Save: Saves the related settings of that window.
y Open Motion Status Dialog: Click to open the Motion Screen Display. The small window allows you to monitor the amount of motion detected in each motion
window. The graphic bars will increase or decrease depending on the image variation. A blue bar means the image variation is under the monitoring level, and
no motion detection alert is triggered. A red bar means the image variation is over the monitoring level and a motion detected alert is triggered.
To Next Page
Loading...
