To Next Page

To Previous Page

Time Configuration –

y Current Server Time: The system will display the current server date and time here.

y Time Zone: Several options in the pull-down menu for you to select in order to adjust the hour of time servers for local settings.

y Enable Daylight Saving: If you want to enable Daylight Saving feature, check this checkbox, then the related parameters will be available for you to do the

further settings next.

y Daylight Saving Offset: Used to adjust correction to account for DST (Daylight Saving Time) if applicable in your region.

y Daylight Saving Date: Used to adjust the range of time and date for DST if applicable in your region.

The system of your IP camera provides you two methods of time configuration: Automatic or Manual:

Automatic Time Configuration – To adopt this feature, check the Synchronize NTP Server checkbox first, and then enter the IP address or domain name of the

time server. Leaving the box blank will connect the camera to default time servers.

Set The Date and Time Manually – Manually set the time by selecting the Year, Month, Day, Hour, Minute, and Second. Otherwise, you may

synchronize the date

and time of the camera with the local computer.