DGS-3024 Gigabit Ethernet Switch Manual
Enter the IP address of the TFTP server and specify the location of the switch settings file on the TFTP server.
Click Start to record the IP address of the TFTP server and to initiate the file transfer.
Upload Settings to TFTP Server
To upload the switch settings to a TFTP server, click on the TFTP Services folder, located in the Maintenance folder, and
then click the Upload Settings to TFTP Server link:
Figure 9- 3. Upload Settings to TFTP Server window
Enter the IP address of the TFTP server and the path and filename for the switch settings on the TFTP server.
Click Start to record the IP address of the TFTP server and to initiate the file transfer.
Upload Log to TFTP Server
To upload the switch history log file to a TFTP server, open the TFTP Services folder in the Maintenance folder and then
click the Upload Log to TFTP Server link:
Figure 9- 4. Upload Log to TFTP Server window
Enter the IP address of the TFTP server and the path and filename for the history log on the TFTP server.
Click Start to record the IP address of the TFTP server and to initiate the file transfer.
Ping Test
Ping is a small program that sends ICMP Echo packets to the IP address you specify. The destination node then responds to
or "echoes" the packets sent from the Switch. This is very useful to verify connectivity between the Switch and other nodes
on the network.
102
To Next Page
Loading...
