DGS-3024 Gigabit Ethernet Switch Manual
Desktop or Shelf Installation
When installing the switch on a desktop or shelf, the rubber feet included with the device should first be attached. Attach
these cushioning feet on the bottom at each corner of the device. Allow adequate space for ventilation between the device
and the objects around it.
Figure 2-1. Installing rubber feet for desktop installation
Rack Installation
The DGS-3024 can be mounted in an EIA standard-sized, 19-inch rack, which can be placed in a wiring closet with other
equipment. To install, attach the mounting brackets on the switch’s side panels (one on each side) and secure them with the
screws provided.
Figure 2- 2A. Attaching the mounting brackets
Then, use the screws provided with the equipment rack to mount the witch on the rack.
4
To Next Page
Loading...
