DGS-3024 Gigabit Ethernet Switch Manual
Community String or
SNMP V3 User Name
Type in the community string or SNMP V3 user name as appropriate.
To implement your new settings, click Apply. To return to the SNMP Host Table, click the Show All SNMP Host Table
Entries link.
SNMP Engine ID
The Engine ID is a unique identifier used for SNMP V3 implementations. This is an alphanumeric string used to identify
the SNMP engine on the Switch.
To display the Switch's SNMP Engine ID, open the SNMP Manger folder, located in the Security Management and click
on the SNMP Engine ID link. This will open the SNMP Engine ID Configuration window, as shown below.
Figure 7- 15. SNMP Engine ID Configuration window
To change the Engine ID, type the new Engine ID in the space provided and click the Apply button
SNMP Trap
Figure 7- 16. SNMP Trap Configuration window
77
To Next Page
Loading...
