DGS-3024 Gigabit Ethernet Switch Manual
To edit a User Account, fill in the appropriate information in the Old Password, New Password, and Confirm New
Password fields. Click Apply to let your change take effect.
The information on the window is described as follows:
Parameter Description
User Name
The user name being edited.
Old Password
Enter the last password used in this field.
New Password
Enter the desired new password in this field.
Confirm New
Password
Enter the new password a second time.
Admin and User Privileges
There are two levels of user privileges, Admin and User. Some menu selections available to users with Admin privileges
may not be available to those with User privileges.
The following table summarizes the Admin and User privileges:
Management Admin User
Configuration Yes Read Only
Network Monitoring Yes Read Only
Community Strings and Trap
Stations
Yes Read Only
Update Firmware and
Configuration Files
Yes No
System Utilities Yes No
Factory Reset Yes No
User Account Management
Add/Update/Delete User Accounts Yes No
View User Accounts Yes No
Table 7- 1. Admin and User Privileges
After establishing a User Account with Admin-level privileges, be sure to save the changes by opening the Maintenance
folder, opening the Save Configuration window and clicking the Save Configuration button.
SNMP V3
Simple Network Management Protocol (SNMP) is an OSI Layer 7 (Application Layer) designed specifically for managing
and monitoring network devices. SNMP enables network management stations to read and modify the settings of gateways,
routers, switches, and other network devices. Use SNMP to configure system features for proper operation, monitor
performance and detect potential problems in the Switch, switch group or network.
69
To Next Page
Loading...
