DGS-3024 Gigabit Ethernet Switch Manual
Switch Information
Figure 6- 2. Switch Information (Basic Settings) window
This window is used to enter name, location, and contact information. Click Apply to activate the new settings.
The information is described as follows:
Parameter Description
Device Type
A description of the switch type.
MAC Address
The Ethernet address for the device. Also known as the physical address.
Boot PROM Version
Version number for the firmware chip. This information is needed for new runtime
software downloads.
Firmware Version
Version number of the firmware installed on the switch. This can be updated by using
the Download Firmware from TFTP Server window in the TFTP Services folder
(Maintenance → TFTP Services → Download Firmware from TFTP Server).
Hardware Version
Version of the switch hardware.
System Name
A user-assigned name for the switch.
System Location
A user-assigned description for the physical location of the switch.
System Contact
Name of the person to contact should there be any problems or questions with the
system. You may also want to include a phone number or extension.
16
To Next Page
Loading...
