DGS-3024 Gigabit Ethernet Switch Manual
Reset gives the option of retaining the Switch's User Accounts and History Log while resetting all other configuration
parameters to their factory defaults. If the Switch is reset using this window, and Save Changes is not executed, the Switch
will return to the last saved configuration when rebooted.
Figure 9- 9. Reset window
Reset System
In addition, the Reset System option is added to reset all configuration parameters to their factory defaults, save these
parameters to the Switch's non-volatile RAM, and then restart the Switch. This option is equivalent to Reset Config
followed by Save Changes.
Figure 9- 10. Reset System window
Reset Config
The Reset Config option will reset all of the Switch's configuration parameters to their factory defaults, without saving
these default values to the Switch's non-volatile RAM. If the Switch is reset with this option enabled, and Save Changes is
not executed, the Switch will return to the last saved configuration when rebooted.
Figure 9- 11. Reset Config window
Logout
Use the Logout page to logout of the Switch's Web-based management agent by clicking on the Logout button.
105
To Next Page
Loading...
