D-Link DGS-3024 - Web-based User Interface; Areas of the User Interface

145 pages

To Next Page

To Previous Page

DGS-3024 Gigabit Ethernet Switch Manual

Figure 2-3. DPS-300 in DPS-900 case with DGS-3024

Figure 2-4. DPS-300 in DPS-800 case with DGS-3024

NOTE: See the DPS-300 documentation for more information.

CAUTION: Do not use the Switch with any redundant power system other than

the DPS-300.

Main Page

Table of Contents3
Preface8
- Intended Readers8
- Notes, Notices, and Cautions8
Safety Cautions10
Safety Instructions10
- Battery Handling Reminder13
- Protecting against Electrostatic Discharge13
Introduction15
- Features15
Unpacking and Setup17
- Unpacking17
- Installation17
  - Desktop or Shelf Installation18
  - Rack Installation18
- Power on19
  - Power Failure19
- External Redundant Power System19
Identifying External Components21
- Front Panel21
- Rear Panel21
- Side Panels21
- LED Indicators22
Connecting the Switch23
- Switch to End Node23
- Switch to Hub or Switch24
- Switch to Core Router Switch24
Introduction26
Login to Web Manager26
- Web-Based User Interface27
- Areas of the User Interface27
Web-Based Network Management26
Configuration29
IP Address29
Switch Information30
Advanced Settings31
Port Configuration33
Port Mirroring34
Igmp35
- IGMP Snooping35
- Static Router Ports Entry36
Spanning Tree37
- 802.1W Rapid Spanning Tree37
- Port Transition States37
- Edge Port38
- P2P Port38
- 802.1D/802.1W Compatibility38
- STP Switch Settings39
- STP Port Settings41
Forwarding42
- Unicast Forwarding42
- Multicast Forwarding43
Vlans44
- Understanding IEEE 802.1P Priority44
- VLAN Description44
- Notes about Vlans on the DGS-302445
- IEEE 802.1Q Vlans45
- 802.1Q VLAN Tags46
- Port VLAN ID47
- Tagging and Untagging48
- Ingress Filtering48
- Default Vlans49
- VLAN and Trunk Groups49
- Static VLAN Entry49
- GVRP Settings51
SNTP Setting53
- Time Setting53
- Time Zone and DST55
Qos57
- Advantages of Qos57
- Understanding Qos57
- Traffic Control59
- 802.1P Default Priority60
- 802.1P User Priority61
- Qos Scheduling Mechanism61
Link Aggregation62
MAC Notification64
- Global Settings64
- Port Settings65
System Log Server67
Port Access Entity69
- 802.1X Port-Based Access Control69
- Authentication Server69
- Authenticator70
- Client71
- Authentication Process71
- Port-Based Network Access Control71
- Configure Authenticator72
- Local Users75
- 802.1X Capability Settings75
  - Initialize Port(S)77
  - Reauthenticate Port(S)78
- RADIUS Server79
Static ARP Settings80
Management81
Security IP81
User Accounts81
- Admin and User Privileges83
Snmp V383
- SNMP User Table84
- SNMP View Table85
- SNMP Group Table87
- SNMP Community Table Configuration89
- SNMP Host Table90
- SNMP Engine ID91
- SNMP Trap91
Monitoring92
Port Utilization92
Packets93
- Received (RX)93
- UMB Cast (RX)95
- Transmitted (TX)98
Errors99
- Received (RX)100
- Transmitted (TX)102
Size104
MAC Address106
Switch History Log108
Browse ARP Table110
IGMP Snooping Forwarding111
IGMP Snooping Group111
Browse Router Port112
VLAN Status112
Session Table113
Port Access Control114
- RADIUS Authentication114
Maintenance115
TFTP Services115
- Download Firmware from TFTP Server115
- Download Settings from TFTP Server115
- Upload Settings to TFTP Server116
- Upload Log to TFTP Server116
Ping Test116
Save Changes117
Reboot Services118
- Reboot118
- Reset118
- Reset System119
- Reset Config119
Logout119
Technical Specifications121
Cable Lengths123
Glossary124
Warranty and Registration Information127
- Limited Warranty128
- Product Type133
- Registration Card144

D-Link DGS-3024 - Web-based User Interface; Areas of the User Interface

Table of Contents

Other manuals for D-Link DGS-3024

Related product manuals