Gigabit Ethernet Switch User’s Guide
3
♦
Supports Link Aggregation Capability.
Management
♦
RS-232 console port for out-of-band management via a PC.
♦
IEEE 802.1d Spanning Tree Algorithm Protocol for creation of alternative backup paths and prevention
of indefinite network loops.
♦
Fully configurable either in-band or out-of-band control via SNMP based software.
♦
Flash memory for software upgrade. This can be done in-band via BOOTP/TFTP. Out-of-band console
can also initiate a download request.
♦
Built-in SNMP management: Bridge MIB (RFC 1493), RMON MIB (RFC 1757), MIB-II (RFC 1213),
VLAN MIB (802.1Q), 802.1D MIB, and D-Link proprietary MIB.
To Next Page
Loading...
