Gigabit Ethernet Switch User’s Guide
28
4.
Press <Esc> to return to the previous screen or Ctrl+T to go to the root screen.
5.
To see a listing of all user accounts and access levels, press <Esc>. Then choose
View/Delete User
Accounts
. The
View/Delete User Account
screen appears.
Administrator and Normal User Privileges
There are two levels of user privileges:
Administrator
and
Normal User
. Some menu selections available to
users with
Administrator
privileges may not be available to
Normal User
s. The main menus shown are the
menus for the two types of users:
The following table summarizes
Administrator
and
Normal User
privileges:
Menu Administrator Normal User
Privilege
Configuration Yes Yes, view only.
Network Monitoring Yes Yes, view only.
Community Strings and Trap Stations Yes Yes, view only.
Update Firmware and Configuration
Files
Yes No
User Account Management
Add/Modify User Account Yes No
View/ Delete User Account Yes No
System Utilities Yes Yes
Factory Reset Yes No
Restart System Yes No
Table 6-1. Administrator and Normal User Privileges
After establishing a User Account with
Administrator
-level privileges, press <Esc> twice. Then choose the
Save Changes
menu (seen below). Pressing any key will return to the main menu. You are now ready to
operate the Switch.
Save Changes
In order to retain any modifications made in the current session, it is necessary to choose
Save Changes
from
the main menu. The following screen will appear to indicate your new settings have been processed:
To Next Page
Loading...
