Gigabit Ethernet Switch User’s Guide
50
Configure Port-based VLANs
Choose
Configure Port-based VLANs
on the
VLAN Configuration
screen (
System
Configuration
!
Configure VLANs & MAC-based Broadcast Domains
) to access the
Port-based VLAN Configuration
menu pictured below (note that if you have just changed to this mode, you must also reboot the Switch before
being able to work with port-based VLANs):
Figure 6-32. Configure VLAN (Port-Based) menu
The field you can set is:
♦
Management Vid
Enter a VLAN name for use with in-band management.
Select
Add a Port-Based VLAN
from the menu above to access the following screen:
Figure 6-33. Create a Port-based VLAN screen
To create a port-based VLAN, fill in the VLAN Name field in the screen above. Next toggle
Yes
or
No
for each
port member. Press APPLY to let the changes take effect.
To Next Page
Loading...
