D-Link DGS-3208F - View;Delete User Account; Setting up the Switch; System Configuration

Gigabit Ethernet Switch User’s Guide
31
View/Delete User Account
Access to the console, whether using the console port or via
Telnet
, is controlled using a user name and
password. Up to three user names can be defined. The console interface will not let you delete the current
logged-in user, however, in order to prevent accidentally deleting all of the users with
Administrator
privilege.
Only users with the
Administrator
privilege can delete users.
To view your user password:
Choose
View/Delete User Accounts
from the
User Account Management
menu. The following screen
appears:
Figure 6-7. View/Delete User Account screen
To delete your user password:
1.
Toggle the Delete field of the user you wish to remove to
Yes
.
2.
Press APPLY to let the user deletion take effect.
Setting Up The Switch
This section will help prepare the Switch user by describing the
System Configuration
,
Firmware and
Configuration Update
,
System Utilities,
and
SNMP Configuration
menus and their respective sub-
menus.
System Configuration
Choose
System Configuration
to access the first item on the DGS-3208F main menu. The following menu
appears: