Gigabit Ethernet Switch User’s Guide
70
Factory Reset
Before performing a factory reset, be absolutely certain that this is what you want to do. Once the reset is
done, all of the Switch’s settings stored in NV-RAM (including TCP/IP parameters, SNMP parameters, the
enabled/disabled settings of ports, security settings, etc.) will be erased and restored to their factory default
settings.
1.
Choose
Factory Reset
from the main menu. The following screen appears:
Figure 6-62. Factory Reset screen
2.
Move the cursor to Yes to confirm the reset and press <Enter>. The main menu screen should appear.
Logout
To exit the Switch, choose
Logout
from the main menu. You will be returned to the opening login screen.
To Next Page
Loading...
