Gigabit Ethernet Switch User’s Guide
92
Figure 7-27. Add a Domain Name to Table window
This window lets you create and remove MAC-based broadcast domains. In the Domain Name field, which is
initially blank, type the name or number that you wish to give the domain; then click
Apply
to add the name
to the table.
You can click the button under Remove to delete a domain.
Click the arrow under Enter to add entries to this table. The following window appears:
Figure 7-28. Add a Mac Address window
This window lets you designate particular machines on your network as members of the MAC-based broadcast
domain named in the title above. To add a machine to the domain, enter the machine’s MAC address and click
Apply
. The address will appear in the table in the lower part of the screen. You can then view its status
To Next Page
Loading...
