D-Link DGS-3630 SERIES - Web Pages

DGS-3630 Series Layer 3 Stackable Managed Switch Hardware Installation Guide
51
AREA 4
This area displays graphical, real-time monitoring gauges of Device
Information, CPU Usage, and Memory Usage.
Web Pages
In area 2, mentioned above, the following main folders will be available for selecting.
Folder Name
Description
System
Features regarding the Switch’s configuration can be viewed and
configured in this folder.
Management
Features regarding the Switch’s management can be viewed and
configured in this folder.
L2 Features
Features regarding the Layer 2 functionality of the Switch can be viewed
and configured in this folder.
L3 Features
Features regarding the Layer 3 functionality of the Switch can be viewed
and configured in this folder.
QoS
Features regarding the Quality of Service functionality of the Switch can
be viewed and configured in this folder.
ACL
Features regarding the Access Control List functionality of the Switch can
be viewed and configured in this folder.
Security
Features regarding the Switch’s security can be viewed and configured in
this folder.
OAM
Features regarding the Switch’s Operations, Administration and
Maintenance (OAM) can be viewed and configured in this folder.
MPLS
Features regarding the Switch’s Multiprotocol Label Switching (MPLS)
can be viewed and configured in this folder.
MPLS L2VPN
Features regarding the MPLS Layer 2 Virtual Private Network (L2VPN)
can be viewed and configured in this folder.
Monitoring
The Switch’s configuration and statistics can be viewed and configured in
this folder.
Green
Features regarding the D-Link Green Technology can be viewed and
configured in this folder.
NOTE: Software features mentioned in this document are based on the Switch running on the most
comprehensive software license available. Refer to Switch Description on page 6 for more
information about DLMS.