D-Link DGS-3630 SERIES - Console Cable (USB to Mini-USB)

DGS-3630 Series Layer 3 Stackable Managed Switch Hardware Installation Guide
60
Console Cable (USB to Mini-USB)
A console cable is used to connect to the USB console port of the Switch to access the command line interface. The
following diagram and table show the standard USB (Type A) to mini-USB (Type B) cable and pin assignments.
Figure B-3 USB to Mini-USB Cable
Pin
USB (Type A)
Mini-USB (Type B)
1
VBUS (Red)
VBUS (Red)
2
D- (White)
D- (White)
3
D+ (Green)
D+ (Green)
4
GND (Black)
ID (Not Connected)
5
N/A
GND (Black)