D-Link DGS-3630 SERIES - LED Indicators

DGS-3630 Series Layer 3 Stackable Managed Switch Hardware Installation Guide
54
Feature
Description
DGS-3630-28SC: 128 Gbps
DGS-3630-28PC: 128 Gbps
DGS-3630-52TC: 176 Gbps
DGS-3630-52PC: 176 Gbps
Maximum Packet Forwarding Rate
DGS-3630-28TC: 95.24 Mpps
DGS-3630-28SC: 95.24 Mpps
DGS-3630-28PC: 95.24 Mpps
DGS-3630-52TC: 130.95 Mpps
DGS-3630-52PC: 130.95 Mpps
Priority Queues
8 Priority Queues per port.
MAC Address Table
Supports 68K MAC addresses (SRM’s LAN mode)
Supports 1024 Static MAC addresses
IP Routing Tables
IPv4: 16K entries
IPv6: 7K entries
IP Host Tables
(L3 Forwarding Table)
IPv4: 32K entries (SRM's IP mode)
IPv6: 16K entries (SRM's IP mode)
Virtual Stacking / Clustering
Supports D-Link Single IP Management version 1.61
Manages up to 32 devices in a virtual stack with a single IP address
LED Indicators
Location
LED
Color
Status
Description
Per Device
Power
Green
Light on (Solid)
Power on
Off
Light off
Power off
MGMT
Green
Light on (Solid)
Link present. No data transmission
Light blinking
Activity. Data transmission
Off
Light off
No link present or the port was shutdown
Console
Green
Light on (Solid)
RJ45 console port is active
Amber
Light on (Solid)
Mini-USB console port is active
Off
Light off
Console off
Fan Err
Red
Light on (Solid)
Fan fail
Off
Light off
Operating normally
RPS
Green
Light on (Solid)
RPS in use
Light off
RPS off
USB
Green
Light on (Solid)
USB plugged in
Light blinking
Busy reading/writing
Red
Light on (Solid)
Read/Write failure
Off
Light off
No USB plugged in
Stacking ID
(7-segment LED)
Green
Light on (1-9)
Stacking number displayed
Light on (H)
Stacking Master
Light on (h)
Stacking Backup Master
Light on (E)
System self-test error