D-Link DI-634M - WEP Encryption Setup

17
DI-634M User’s Manual
D-Link Systems, Inc.
Using the Configuration Menu
Select Shared Key.
Wired Equivalent Privacy (WEP) is a wireless security protocol
for Wireless Local Area Networks (WLAN). WEP provides
security by encrypting the data that is sent over the WLAN.
Select Enabled or Disabled. Disabled is the default setting.
(Note: If you enable encryption on the DI-634M make sure to
also enable encryption on all the wireless clients or wireless
connection will not be established).
Select the level of encryption desired: 64-bit or 128-bit.
Select HEX or ASCII.
Input up to 4 WEP keys; select the one you wish to use.
Home > Wireless (WEP)
Authentication:
Key Type:
WEP Encryption:
Keys 1-4:
WEP: