38
DI-634M User’s Manual
D-Link Systems, Inc.
Using the Configuration Menu
Use IP Filters to deny LAN (Local Area Network) computers access to the Internet.
Enter the IP address or range of IP addresses and the ports you would like to block
access to.
Select Enabled or Disabled.
Enter the IP address or range you want to block.
Enter the port or range of ports to block.
Select the protocol type (TCP, UDP, or Both).
Select a schedule from the drop-down menu.
Enter a description for your rule.
Filters:
IP Range:
Port:
Protocol Type
:
Schedule:
Advanced > Filters (IP Filters)
Details:
To Next Page
Loading...
