47
DI-634M User’s Manual
D-Link Systems, Inc.
Using the Configuration Menu
Use this option to save the current router configuration settings
to a file on the hard disk of the computer you are using. First,
click the Save button. You will then see a file dialog, where you
can select a location and file name for the settings.
Use this option to load previously saved router configuration
settings. First, use the Browse control to find a previously save
file of configuration settings. Then, click the Load button to
transfer those settings to the router.
This option will restore all configuration settings back to the
settings that were in effect at the time the router was shipped
from the factory. Any settings that have not been saved will be
lost, including any rules that you have created. If you want to
save the current router configuration settings, use the Save
button above.
Save Settings to
Local Hard Drive:
Load Settings
from Local Hard
Drive:
Restore to Factory
Default Settings:
Tools > System
To Next Page
Loading...
Need help?
General
