36
DI-634M User’s Manual
D-Link Systems, Inc.
Using the Configuration Menu
StreamEngine QoS (Quality of Service) Technology will improve your online experience
by ensuring that important traffic is prioritized over other network traffic, such as FTP
or Web. Click Enabled to turn this service on.
Enable this option when you have a slow Internet uplink. This
will reduce the impact that large low priority packets can have
on more urgent ones by breaking the large packets into several
smaller packets.
When enabled, this option causes the router to automatically
measure the useful uplink bandwidth each time the WAN
interface is re-established (e.g. after a reboot).
This is the uplink speed measured when the WAN interface was
last re-established. The value may be lower than that reported
by your ISP as it does not include all of the network protocol
overheads associated with your ISP’s network. Typically, this
figure will be between 87% and 91% of the stated uplink speed
for xDSL connections and around 5 kbps lower for cable network
connections.
Dynamic
Fragmentation:
Automatic Uplink
Speed:
Measured Uplink
Speed:
Advanced > StreamEngine
To Next Page
Loading...
