35
DI-634M User’s Manual
D-Link Systems, Inc.
Using the Configuration Menu
Port forwarding is used to open a port or a range of ports in your router and redirect
data through to these ports to a single PC on your network.
Click the Enabled or Disabled radio button.
Enter a name for your port forwarding rule.
Enter the IP address of the computer or device you want to
forward the ports to.
Enter the TCP ports to open. You may enter a single port or a
range of ports (1000-2000). Use a comma to seperate ports
or range of ports (1000-2000,99,133).
Enter the UDP ports to open.
Select to Allow or Deny (block) the ports.
The schedule of time when the virtual service will be enabled.
The schedule may be set to Always, which will allow the
particular service to always be enabled. If it is set to Time, select
the time frame for the service to be enabled. If the system time
is outside of the scheduled time, the service will be disabled.
Name:
IP Address:
TCP Ports to
Open:
UDP Ports to
Open:
Firewall Rule:
Advanced > Port Forwarding
Schedule:
To Next Page
Loading...
Need help?
General
