22
DI-634M User’s Manual
D-Link Systems, Inc.
Using the Configuration Menu
Please be sure to remove any existing PPPoE client software installed on your
computers.
Choose PPPoE (Point to Point Protocol over Ethernet) if your ISP uses a PPPoE
connection. Your ISP will provide you with a username and password. This option
is typically used for DSL services. Select Dynamic PPPoE to obtain an IP address
automatically for your PPPoE connection. Select Static PPPoE to use a static IP address
for your PPPoE connection.
Home > WAN (PPPoE)
To Next Page
Loading...
Need help?
General
