25
DI-634M User’s Manual
D-Link Systems, Inc.
Using the Configuration Menu
Maximum Transmission Unit-1492 is the default setting-you
may need to change the MTU for optimal performance with
your specific ISP.
Typically, connections such as PPPoE, PPTP, and L2TP are not
always on. The router allows you to set the connection mode.
The settings are:
Always on: A connection to the Internet is always
maintained.
Connect on demand: A connection to the Internet is made
as needed; and the connection is dropped after “Maximum
Idle Time” minutes of no activity.
Manual: You have to open up the Web-based management
interface and click the Connect button manually any time that
you wish to connect to the Internet.
Home > WAN (PPTP)
MTU:
Connection Mode
Select:
To Next Page
Loading...
