79
DI-634M User’s Manual
D-Link Systems, Inc.
Frequently Asked Questions
Step 9: Turn off your DSL modem for 2-3 minutes. Turn back on. Once the modem has
established a link to your ISP, plug the power back into the D-Link router. Wait about
30 seconds and log back into the router.
Step 10: Click on the Status tab in the web configuration where you can view the device
info. Under WAN, click
Connect. Click Continue when prompted. You should now see
that the device info will show an IP Address, verifying that the device has connected to
a server and has been assigned an IP Address.
To Next Page
Loading...
