83
DI-634M User’s Manual
D-Link Systems, Inc.
Frequently Asked Questions
Step 2: Log into the web based configuration of the router by typing in the IP Address
of the router (default:192.168.0.1) in your web browser. The username is
admin (all
lowercase) and the password is blank (nothing)
Step 3: Click the Advanced tab and then click on the
DMZ button. Select Enable and
type in the IP Address you found in step 1.
Step 4: Click Apply and then Continue to save the changes.
Note: When DMZ is enabled, Virtual Server settings will still be effective. Remember, you
cannot forward the same port to multiple IP Addresses, so the Virtual Server settings
will take priority over DMZ settings.
To Next Page
Loading...
