DIR-806A Wireless AC750 Multi-Function Router
User Manual
Configuring Device (Router Mode)
Parameter Description
Source IP address
The source host/subnet IP address.
To choose a device connected to the router's LAN at the moment,
select the relevant IP address from the drop-down list (the field will
be filled in automatically).
If you want to specify a range of IP addresses, click the Range icon
( ) and enter the starting and ending addresses in the left and
right fields correspondingly.
Destination IP address
The destination host/subnet IP address.
To choose a device connected to the router's LAN at the moment,
select the relevant IP address from the drop-down list (the field will
be filled in automatically).
If you want to specify a range of IP addresses, click the Range icon
( ) and enter the starting and ending addresses in the left and
right fields correspondingly.
Ports
Source port
A port of the source IP address. You can specify one port, several
ports separated by a comma, or a range of ports separated by a colon.
Destination port
A port of the destination IP address. You can specify one port,
several ports separated by a comma, or a range of ports separated by
a colon.
Click the Apply button.
To edit a rule for IP filtering, click the link to the relevant rule. On the opened page, change the
needed parameters and click the Apply button.
To remove a rule for IP filtering, click the link to the relevant rule. On the opened page, click the
Delete button.
To remove all rules from this page, click the Clear all button (the button is displayed if at least one
rule exists).
Page 159 of 233
To Next Page
Loading...
