DIR-806A Wireless AC750 Multi-Function Router
User Manual
Configuring Device (Access Point Mode)
Figure 150. The tab for adding a MAC address.
Click the Add button and enter an address in the field displayed. Also you can enter the MAC
address of a device connected to the router's LAN at the moment. To do this, select the relevant
device from the Known IP/MAC addresses drop-down list (the field will be filled in
automatically). Then click the Apply button.
To remove a MAC address from the list of MAC addresses, select the checkbox located to the left
of the relevant MAC address and click the Apply button.
Page 203 of 233
To Next Page
Loading...
