DIR-806A Wireless AC750 Multi-Function Router
User Manual
Installation and Connection
To configure all parameters of the router independently without the Wizard, click the Advanced
settings link in the bottom right corner of the page.
Figure 24. The advanced settings page in the access point mode.
The pages of the Status section display data on the current state of the router (for the description of
the pages, see the Status section, page 187).
The page of the Net section is designed for configuring basic parameters of the LAN interface of
the router (for the description of the page, see the Net section, page 190).
The pages of the Wi-Fi section are designed for specifying all needed settings of the router's
wireless network (for the description of the pages, see the Wi-Fi section, page 193). Also you can
enable or disable one or both bands of the device's WLAN directly from the advanced settings page.
To disable one of the WLAN bands, select the Off position ( ) of the relevant
Enable/Disable Wi-Fi switch. To enable one of the WLAN bands, select the On position
( ) of the relevant Enable/Disable Wi-Fi switch.
The page of the Firewall section is designed for configuring MAC-address-based filtering for
computers of the router's LAN (for the description of the page, see the Firewall section, page 216).
Page 39 of 233
To Next Page
Loading...
